Hotmelt Adhesives

High Performance Sefox Hotmelt Adhesive

Hotmelt adhesives are high performance adhesives produced in 100% solid form and without solvent. Hotmelt adhesives have been used in many production processes and they are an adhesive that respects the environment and human health with their ever-expanding usage areas.

Hotmelt adhesives do not require drying after application, provide continuous, automatic and high speed operation, provide environment-friendly solutions with no solvent, no problems such as flow / leak during storage / transportation due to the solid structure of the products, good adhesion and flexibility and The wide product range that provides adhesion with different materials is one of the main reasons for the increasing use of this adhesive type.

Hotmelt adhesives are solvent-free formulations that become liquid when heated and are defined as melt adhesives. In order to obtain high adhesion, the applied surfaces must be combined within an open time. Hot melts have the ability to quickly gain strength after cooling. They are thermoplastic adhesives that harden physically in their final chemical form.

Sefox 7000 Serifi Polyolefin Based Hotmelt Adhesive

It is defined as hot melt adhesives, which are produced by using the Polyolefin (or its derivative Amorphous Poly Alpha Olefin) polymers, known as PO, as raw materials.

Application techniques: They can be easily applied in one and two ways with the automatic hotmelt machine. Application temperature should be between 150 ° C and max 190 ° C. Care should be taken to ensure that the surfaces to be applied are clean, oil-free and dry.
uygulama sıcaklığı min 150 °C – max 190° C aralığında olmalıdır. Uyugulama yapılacak yüzeylerin temiz, yağsız ve kuru olmasına dikkat etilmelidir.

Application Areas: Sefox adhesives are special adhesives used for spreading the mattress industry, various PP PE and sponge, Paper, plastic films and fabrics.

Storage Conditions: Sefox Adhesives can be stored for about 12 months in a cool environment. Avoid exposure to direct sunlight.

Packaging: They are packed as 12 kg / 22 kg blocks or granules in kraft bags.

Product Name

Type

Base

Sefox 7400

Hotmelt Based

Poliofilin

Sefox 7560

Hotmelt Based

Poliofilin

Ürün Bilgi Formu

    Sefox 8000 Series Eva Based Hotmelt Adhesive

    Ethyl Vinyl Acetate, in short, this type of adhesives manufactured based on EVA constitute the most common type of adhesive. They are preferred due to their flexibility, optimum drying time, color tone diversity advantages and ease of use and long durability. These types of adhesives, which can be manufactured as filled, have a close relationship, although not directly proportional to the quality filling rate. As the filling rate increases, adhesive density increases, which directly affects the amount of consumption. Since the product types offered without fillers will provide high performance by using less proportions, they are advantageous in the long term compared to filled products.
    The biggest reason why EVA based adhesives, which are very intense with their choices, are preferred and used so much, is that they are considered as cost-effective adhesives due to their cost efficiency. In different Bonding applications, the optimum formulation should be specially developed according to the application techniques and the ambient conditions of the end users, especially on the surfaces to be bonded (polarity and surface roughness).
    Farklı Yapıştırma uygulamalarında, optimum formülasyon özellikle yapıştırılacak yüzeylere( polarite ve yüzey pürüzlülüğü) uygulama tekniklerine ve son kullanıcıların hizmet veren ortam koşullarına göre özel olarak geliştirilmelidir.

    Application techniques: They can be easily applied in one and two ways with the automatic hotmelt machine. Application temperature should be between 150 ° C and max 190 ° C. Care should be taken to ensure that the surfaces to be applied are clean, oil-free and dry.
    uygulama sıcaklığı min 150 °C – max 180° C aralığında olmalıdır. Uyugulama yapılacak yüzeylerin temiz, yağsız ve kuru olmasına dikkat etilmelidir.

    Application Areas: Sefox adhesives are used for spring mattress industry, bag spring industry, carpet industry filter, printing and strapping applications.

    Storage Conditions: Sefox Adhesives can be stored for about 12 months in a cool environment. Avoid exposure to direct sunlight.

    Packaging: They are packed as 12 kg / 22 kg blocks or granules in kraft bags.

    Product Name

    Type

    Base

    SEFOX 8000

    Hotmelt

    Eva

    Ürün Bilgi Formu

      Sefox 9000 Series Rubber Based Hotmelt Adhesive

      At first you might be wondering how you can even use natural rubber as glue. They are defined as hot melt adhesives produced by using Styrene Butadiene Rubber, also known as SBS, as raw material.

      Application techniques: They can be easily applied in one and two ways with the automatic hotmelt machine. Application temperature should be between 150 ° C and max 190 ° C. Care should be taken to ensure that the surfaces to be applied are clean, oil-free and dry.
      uygulama sıcaklığı min 140 °C – max 170° C aralığında olmalıdır. Uygulama yapılacak yüzeylerin temiz, yağsız ve kuru olmasına dikkat edilmelidir.

      Application Areas: Sefox adhesives are applied to spring mattress industry, bag spring industry, furniture upholstery industry, Package bonding hygiene sectors and ground floor applications.

      Storage Conditions: Sefox Adhesives can be stored for about 12 months in a cool environment. Avoid exposure to direct sunlight.

      Packaging: They are packed in 12 kg / 22 kg blocks or pillow.

      Product Name

      Type

      Base

      Sefox 9000

      Hotmelt Based

      Rubber Based

      Sefox 9200

      Hotmelt Based

      Rubber Based

      Sefox 9400

      Hotmelt Based

      Rubber Based

      Sefox 9500

      Hotmelt Based

      Rubber Based

      Ürün Bilgi Formu

        en_US
        tr_TR en_US